Array ( )
The REAF 7 10A MW DUAL is a Semi-flush recessed mounting microwave occupancy sensor with two 10amp load switching relays, the secondary relay can be used for separate switching of a fan or solenoid control.
Features & Benefits
- Mounting Type: Recessed
- Wireless: No
- Maximum Mounting Height: 3M
- Occupancy Detection: Microwave
- Daylight Control: Daylight Regulation/Bright Out
- Detection Range – 7m at 2.5m mounting height
- Output: 230V or Volt-free relay
- Programmer: REA-DPA
- Voltage: 230v 50/60Hz
- Control: 2x 10A relay
- IP Rating: IP20
- Colour: White
- Standby Power: 1W
Adjustable Parameters
- Movement Sensitivity: Minimum, Very Low, Low, Medium, High, Very high, Maximum
- Power Up State: On/Last/Vacant
- Occupied trigger action: Presence
- Occupied Time: 10 seconds – 12 hours
- 2ns Occupied Time: 10 seconds – 12 hours
- Photocell Mode: Active/Passive/Ignore
- P’cell Turn On: 0 to 500
- P’cell Turn Off: 0 to 500
- More parameters available on programmer
- REA DPA
Diagrams
Ordering
Sensor |
|||
---|---|---|---|
Code | Description | ||
REAF 7 10A MW DUAL | Flush Reacta 7 microwave with dual relay | ||
REA 7 SURFMT | Reacta 7 Surface Mounting Kit |